top of page

Components

CPM-12D Meter :

The 12D-CPM meter, specifically the ADTEK CPM-12D Multifunction Power Meter, is a DIN rail-mounted device designed for high-accuracy power measurement in single-phase and three-phase systems.

  • Functionality: Measures voltage, current, active/reactive/apparent power, energy (kWh, kVarh), power factor, and frequency.

  • Mounting: DIN rail design for easy installation in electrical panels.

  • Communication: Equipped with a standard RS485 Modbus RTU port for data integration; supports baud rates up to 115200bps with <1% data error rate.

    Display: Features a front-panel LCD with buttons for programming and high brightness for visibility in direct sunlight.

  • Accuracy: Offers 1% class accuracy for energy measurement and monitoring.

  • Data Logging: Includes 2 MB flash memory for event and data logging with Time-of-Use (TOU) functionality.

  • Wiring Flexibility: Supports auto wiring change via software (with conditions; refer to manual for details).

  • Measurement: True RMS measurement with 128 points/cycle sampling for precision.

  • System Compatibility: Supports 1P2W, 1P3W, 3P3W (1/2/3CT), and 3P4W (1/3CT) configurations for balanced/unbalanced loads.

  • Certifications: CE and FCC approved, with an MTBF reliability of over 60,000 hours.

  • Additional Features: Includes 1 pulse output and displays accumulated CO2 emissions for environmental monitoring.

1-removebg-preview.png

RT10-32X Fuse Holder :

The RT18-32X fuse holder (often referred to interchangeably with RT10-32X in some contexts) is a cylindrical fuse holder designed for 10x38mm fuses, commonly used in low-voltage electrical systems for circuit protection.

​

  • Measurement Capabilities: Measures voltage, current, active/reactive/apparent power, energy (kWh, kVarh), power factor, and frequency.

  • Mounting: DIN rail design for straightforward installation in electrical panels.

  • Communication: Standard RS485 Modbus RTU port with baud rates up to 115200bps and <1% data error rate for reliable data integration.

  • Display: High-brightness front-panel LCD with programming buttons, readable even in direct sunlight.

  • Accuracy: 1% class accuracy for precise energy measurement and monitoring.

  • Data Logging: 2 MB flash memory for event and data logging, including Time-of-Use (TOU) functionality.

  • Wiring Flexibility: Supports auto wiring change via software (subject to conditions; see operation manual).

  • Measurement Precision: True RMS measurement with 128 points/cycle sampling for high accuracy.

  • System Compatibility: Supports 1P2W, 1P3W, 3P3W (1/2/3CT), and 3P4W (1/3CT) configurations for balanced and unbalanced loads.

  • Certifications: CE and FCC approved with a Mean Time Between Failures (MTBF) exceeding 60,000 hours.

  • Additional Features: Includes 1 pulse output and displays accumulated CO2 emissions for environmental monitoring.

image-removebg-preview.png

ZQWL-GE300D Wifi Dongle :

  • Functionality: Likely a USB WiFi adapter designed to provide wireless connectivity for devices such as PCs, laptops, or other systems lacking built-in WiFi.

  • Wireless Standards: Expected to support IEEE 802.11 b/g/n, common for 300 Mbps dongles, enabling 2.4 GHz wireless connections.

    Speed: Potentially supports up to 300 Mbps data transmission rate, typical for devices in this category, based on similar products like the Zeb-USB300WF1.

  • Interface: Likely uses a USB 2.0 interface for plug-and-play compatibility with devices, consistent with standard WiFi dongles.

  • Security: May include WPA/WPA2 and WPA-PSK/WPA2-PSK encryption standards for secure wireless connections, as seen in comparable models.

  • Compatibility: Expected to support multiple operating systems, such as Windows (XP and above), macOS, and possibly Linux, depending on driver availability.

  • Form Factor: Likely compact or nano-sized for portability, similar to other modern WiFi dongles like the TP-Link TL-WN725N or Edimax EW-7811Un.

  • Additional Features: Could include access point mode for creating a WiFi hotspot, as seen in devices like the Zeb-USB300WF1.

  • Driver Support: May require a driver CD or online download for full functionality, especially for Linux or older systems, based on typical WiFi dongle setups.

  • Limitations: No specific information confirms dual-band (2.4 GHz/5 GHz) support, advanced features like MU-MIMO, or compatibility with newer standards like 802.11ac, unlike some higher-end dongles.

2-removebg-preview.png

DIN Rail Power Supply :

A DIN rail power supply is a switched-mode power supply that converts unstable input voltage (AC or DC) into regulated DC output voltage, designed to mount on a standardized DIN rail (TS-35, TS-7.5, or TS-15) for use in industrial control panels, distribution boards, and enclosures. It provides reliable power for industrial automation, control systems, and other equipment.

​​

  • Input Voltage Range: Supports wide AC input (85–264VAC) or DC input (90–375VDC for single-phase, 450–760VDC for three-phase) for versatile compatibility.

  • Output Voltage Options: Available in 5V, 12V, 15V, 24V, or 48V DC, with power ratings from 2.5W to 1.5kW.

  • High Efficiency: Achieves up to 95–96% efficiency, reducing energy consumption and heat generation.

  • Compact Design: Ultra-slim or low-profile designs (e.g., 63mm width for some models) for space-constrained installations.

  • Mounting: Easily attaches to standard TS-35, TS-7.5, or TS-15 DIN rails for quick integration.

  • Protection Mechanisms: Includes overvoltage, overload, short-circuit, and thermal protection to safeguard equipment.

  • Durability: Operates in harsh conditions, with temperature ranges from -40°C to +85°C and fanless designs for reduced maintenance.

  • Safety Certifications: UL 508, UL 60950-1, EN 60335-1, and Class I Div 2 compliant for industrial and hazardous environments.

  • Connection Types: Features push-in, CAGE CLAMP, or lever-actuated terminals for secure, vibration-proof wiring.

  • Additional Features: Offers options like power factor correction (PFC), remote on/off, peak power capability (up to 150% for 4s), and redundancy modules for enhanced reliability.

  • Environmental Resistance: Conformal coating available for high humidity, dust, or vibration-prone environments.

image-removebg-preview (1).png
image.png

Circuit Diagram

Not Installed.jpg

Unassembled

Installed Product

Our product is installed on a machine in Industry 4.0 for power observation.

Installed.jpg

Demo Results

Power Chart for 1 Day

image.png

Click Here for Live Data

Power Chart for 7 Days

image.png

Innovative

Discover our cutting-edge services that optimize energy consumption and enhance efficiency for a sustainable future.

Efficient

Our services provide real-time data analysis, empowering users to make informed decisions for energy management.

Smart Solutions

Experience smart solutions tailored to your needs, integrating advanced technology for seamless energy monitoring via AWS cloud and application.

Reliable Support

Count on our reliable support team to assist you in maximizing the potential of your Smart Power Meter system.

Comparison

Sense Home Energy Monitor :

  • Relies on AI to accurately disaggregate appliance usage.

  • Requires professional installation and involves high upfrontront cost ($300+).

  • Impressive depth features, but most of them not needed for entry level solutions

P3 Kill a Watt :

  • Single appliance tester, offers no remote access or historical data tracking.

  • Manual checking and no holistic view of home energy usage.

  • Extremely cheap ($20-$30) but doesn't address the information issue.

Smart Power Meter(Our Product) :

  • Easy installation, better reliability, and a lower upfront cost compared to the Sense Home Energy Monitor.

  • More Feature rich and with clearer, more complete data than the P3 Kill a Watt.

bottom of page